Portable Turbidimeter Turbidity Meter Kit Turbidity Tester with 2 PCS Glass Sample Vials Range 0~1100 NTU/FNU, 0~275 EBC, 0~9999.
$369.99 – $379.99Compare
Measurement Range: 0~1100 NTU/FNU, 0~275EBC, 0~9999 ASBC
Resolution: 0.01(0~100 NTU), 0.1 (100~999NTU), 1 (999~1100 NTU)
Accuracy: ±2%(0~500 NTU), ±3% (501~1100NTU)
Default Calibration Standards: 0.02 NTU,200 NTU, 500 NTU, 1000 NTU or User-Defined
Light Source: Infrared-emitting diode (850nm wave length)
Detector: Silicon Photodiode
Stray Light: <0.02 NTU
Sample Vials: 60(H)×25(Dia)mm
Power Off: Manualor Automatic (15 minutes)
Reset Function: Yes
Memory: Stores up to 100 data sets
Output: USB Communication Interface
Operating Temperature: 0~60°C
Important Notes for Measurement and Calibration:
Do not hold the meter in your hand during measurement and calibration.
Glass vials and caps must be cleaned thoroughly with deionized water after each measurement. Minor residuals can cause errors.
The outside of the vial must be clean and dry, before starting the test. Wipe the vial with lint-free cloth to remove fingerprints or water drops.
If the vial has minor scratches or scuffs, add a few drops of silicone oil to outside of the vial. Wipe with lint-free cloth.
For the low turbidity samples (0 to 200NTU), we recommend that you use the same be aligned with the arrow on the meter.
To avoid errors from ambient light interference, do not use the meter in bright sunlight. Always close the light shield lid during measurement and Calibration.
Avoid spillage of water in the sample chamber. It may cause damage to the meter.
|Number of Items||1|
11.4 x 9.6 x 3.6 inches; 2.65 Pounds
March 31, 2017
#8 in Lab Turbidity Meters
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.